- 您现在的位置：买卖IC网 > Sheet目录203 > APS INT2012 (Tripp Lite)INVERTER 2000W 230VAC OUT
Supports 120V AC output from a 120V AC 16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts
and voltage fluctuations for equipment compatible with a one cycle transfer time
2000 watts continuous AC output in inverter mode, 2400 watts continuous AC output in AC mode
Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results,
utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and
allow inverter/charger to fully cool before and after OverPower usage.)
3-stage, selectable 25/100 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
Protected hardwire output passes 120V line power or inverter output through to connected equipment
Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full
battery charge when AC is present without auto transfer and SYSTEM OFF settings
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dip switches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and
selectable 75/85/95/105V AC low voltage auto transfer during brownouts
Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery
charger low/high settings
Resettable 25A charger AC input breaker and resettable 20A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and
temperature related failures
Internal Grounding Terminal properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes
user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged
Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
Specifications
OVERVIEW
Intended Application
OUTPUT
Frequency compatibility
Output watts
Continuous output capacity (watts)
Peak output capacity (watts)
Output nominal voltage
Output voltage regulation
Output frequency regulation
Emergency Home Power (Sump Pumps, Furnace Motors, Lighting, Computers & Radios)
60 Hz
2000
2000
4000
120V
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
60 Hz (+/- 0.3 Hz)
2 / 5
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
APS1012
INVERTR 1000W 12VDC 2OUT W/CHRGR
APS1250
INVERTER W/BATT CHARGE 1250W
APS1524
INVERTER 1500W HARDWIRE OUTPUT
APS2424
INVERTR 2400W 24VDC W/CHRGR
APS2448UL
INVERTER 2400W 48VDC OR 120VAC
APS3636VR
INVERTER 3600W 36VDC OR 120VAC
APS512
INVERTER 500W 12VDC 2OUT W/CHRGR
APS612
INVERTER 600W 12VDC 2OUT W/CHRGR
相关代理商/技术参数
APS INT2424
功能描述:功率调节 2400 continuous watts 3600 overpower watts 4800 doubleboost watts Hardwired 2400VA, 24V DC, RJ45 remote port. 30/7.5-amp (selectable) regulated charger. RoHS:否 制造商:Power-One 输入电压（标称）: 输出电压: 输出功率: 电压调节准确度: 出口数量: 特点: 安装类型:
APS INT3636VR
功能描述:功率调节 3600 continuous watts 5400 overpower watts 7200 doubleboost watts Hardwired 3600VA, 36V DC, RJ45 remote port. 30-amp (selectable) regulated charger. Voltage regulated. RoHS:否 制造商:Power-One 输入电压（标称）: 输出电压: 输出功率: 电压调节准确度: 出口数量: 特点: 安装类型:
APS006N
制造商:IDEC CORPORATION 功能描述:TWS
APS00A
功能描述:板机接口移动感应器和位置传感器 1ST LEVEL VEH POS RoHS:否 制造商:Panasonic Electric Works 封装 / 箱体:TO-5 感应距离:3 m 输出类型:Digital 电源电压-最大:6 V 电源电压-最小:2.3 V 电源电流: 最大工作温度:+ 60 C 封装:Bulk
APS00B
功能描述:板机接口移动感应器和位置传感器 8 PIN SOIC SMT HIGH RES MAGNETIC
RoHS:否 制造商:Panasonic Electric Works 封装 / 箱体:TO-5 感应距离:3 m 输出类型:Digital 电源电压-最大:6 V 电源电压-最小:2.3 V 电源电流: 最大工作温度:+ 60 C 封装:Bulk
APS00B
制造商:Honeywell Sensing and Control 功能描述:MAGNETIC HALL-EFFECT POSITION SENSOR 制造商:Honeywell Sensing and Control 功能描述:IC, HALL EFFECT SENSOR, BIPOLAR, 8-SOIC
APS00B-T13
制造商:HONEYWELL-ACC 制造商全称:Honeywell Accelerometers 功能描述:High Resolution Magnetic Angular Position Sensor IC
APS00M
功能描述:板机接口移动感应器和位置传感器 COMM SOLID STATE/MAG RoHS:否 制造商:Panasonic Electric Works 封装 / 箱体:TO-5 感应距离:3 m 输出类型:Digital 电源电压-最大:6 V 电源电压-最小:2.3 V 电源电流: 最大工作温度:+ 60 C 封装:Bulk